Spindle Replacement

Spindle Replacement guides

Practical, plain-English guides to costs, rules and getting the job done right.

How Much Does Stair Spindle Replacement Cost in the UK?

Replacing one or two broken stair spindles typically costs £90–£180 fitted. A full re-spindle of a straight stair and landing in pine or hemlock runs £550–£1,100, and solid oak spindles £850–£1,700. Metal spindle upgrades cost £900–£1,800, glass panel balustrades £1,600–£3,500, and turned copies of period spindles start from £35 per spindle plus fitting.

Read the guide →

Stair Spindle Gap Regulations UK: The 100 mm Rule Explained

Under Approved Document K, guarding on stairs and landings should not let a 100 mm sphere pass through any opening, so the clear gap between spindles must be less than 100 mm. In a single-family home, guarding must be at least 900 mm high. Existing stairs do not have to be upgraded automatically, but new or replacement balustrades should meet these figures.

Read the guide →

How to Replace a Broken Stair Spindle: Step-by-Step Guide

To replace a broken stair spindle, remove the fillets holding it in the handrail and baserail, cut out the old spindle, measure the rake angle, cut the new spindle to the same length and angle, glue and pin it in place, and refit the fillets. On cut-string stairs, the spindle fits into the tread instead. A joiner typically charges £90–£180 for one or two spindles.

Read the guide →

Oak vs Metal vs Glass Stair Spindles: Which Should You Choose?

Painted pine or hemlock is the cheapest re-spindle at £550–£1,100 for a straight stair and landing. Solid oak spindles cost £850–£1,700, metal spindles £900–£1,800 and glass panel balustrades £1,600–£3,500. Oak suits traditional and modern homes, metal gives a slim, contemporary or period ironwork look, and glass maximises light but needs regular cleaning.

Read the guide →

Matching Victorian and Edwardian Stair Spindles: A Guide

Original Victorian, Edwardian and 1930s spindles rarely match modern stock profiles, so the best route is usually a turned copy made from an original, costing from £35 per spindle plus fitting. A joiner or wood turner copies the profile, height and section from a sample spindle. In listed buildings, check whether listed building consent is needed first.

Read the guide →

Spindle Replacement glossary →

Get a free spindle replacement quote

Tell us what you need and we'll come back with a clear price.

Request a quote