Spindle Replacement

Spindle Replacement

Full Staircase Re-Spindling

Removing every spindle on a flight and landing and fitting a complete new set in a modern or traditional style.

Free Spindle Replacement quote

No obligation. We only use your details to reply about this job.

Full Staircase Re-Spindling — Spindle Replacement

What's involved

Re-spindling transforms a staircase without replacing the treads and risers. The joiner cuts out the old spindles, cleans out the handrail and baserail grooves, and checks that the rails themselves are sound. New spindles are cut to the pitch, spaced evenly so no gap exceeds 99 mm, and fixed with glue, pins and fillets. A typical straight stair with landing has 25 to 40 spindles. Common choices are square chamfered pine for painting, white primed hemlock, solid oak or contemporary turned profiles. The work takes one day for most homes, with the stairs usable throughout. Painting or finishing follows after the joiner leaves unless included. You need to clear the hallway and landing and lay down dust sheets.

How we handle it

  1. Tell us what needs doing

    Use the quote form to say how many spindles are broken or whether you want a full replacement, and attach photos of the staircase and a close-up of a spindle.

  2. Measure and choose

    A local joiner confirms the spindle size, rail type and rake, and helps you choose profile, timber, metal or glass. You get a fixed written price.

  3. Order materials

    Stock spindles arrive in a few days. Turned copies of period spindles and toughened glass panels take one to three weeks to make.

  4. Remove and fit

    Old spindles are cut out, rails are cleaned and checked, and new spindles are cut to the pitch, spaced correctly and fixed with glue, pins and fillets.

  5. Finish and tidy

    Filler, sanding and finishing are completed if included. The joiner checks the balustrade is rigid, clears up and leaves the stairs ready to use.

Price guide

Spindle replacement prices depend on how many spindles are involved, the material, and whether handrails or newels also need replacing. Stock square spindles are inexpensive, while turned copies, metal and glass cost more. Every job gets a fixed price after photos or a short visit, covering labour and materials.

  • Metal spindle upgrade: £900–£1,800. Wrought iron or steel bars with shoes, fitted to new or existing rails.
  • Oak spindles, full set: £850–£1,700. Solid oak spindles fitted to existing rails, ready for oiling or lacquer.
  • Full re-spindle, straight stair and landing: £550–£1,100. Around 25 to 40 pine or hemlock spindles fitted in a day, finishing extra.

Questions about full staircase re-spindling

Can I replace spindles with glass?

Yes. Toughened safety glass panels can replace spindles, held between existing rails with clamps or fitted into slotted handrails and baserails. Glass makes hallways brighter and is easy to clean. Panels are made to measure after the old spindles are removed, so allow one to two weeks lead time.

Are metal spindles stronger than wooden ones?

Metal spindles are harder to snap than slim timber spindles and do not split, but the overall strength of a balustrade depends more on the handrail, baserail and newel fixings. Metal bars are fixed with shoes that sit in grooved rails. Either material is safe when fitted properly to sound rails.

Do I need permission to replace stair spindles?

In most homes you do not need planning permission or Building Control approval to replace spindles. It is good practice to ensure the new balustrade meets current guidance on gap size and height. If your home is listed, you may need listed building consent before altering the staircase.

Get a free spindle replacement quote

Tell us what you need and we'll come back with a clear price.

Request a quote