Spindle Replacement

Spindle Replacement

Safety Upgrades and Gap Closing

Adding extra spindles, raising handrails and closing gaps so balustrades meet modern safety guidance for children.

Free Spindle Replacement quote

No obligation. We only use your details to reply about this job.

Safety Upgrades and Gap Closing — Spindle Replacement

What's involved

Many older stairs have spindles spaced too widely, a low handrail, or open landings with gaps a small child could slip through. Building Regulations for new work say gaps should not let a 100 mm sphere pass through, and guarding on stairs and landings in a home should be at least 900 mm high. The joiner measures every gap and the rail height, then adds intermediate spindles, refits spindles at closer spacing or raises the handrail with taller newels. Landings with a low balustrade can have the handrail lifted to the correct height. Most upgrades take half a day to a day. You do not usually need Building Control for this kind of repair, but it is sensible to bring old stairs up to current guidance.

How we handle it

  1. Tell us what needs doing

    Use the quote form to say how many spindles are broken or whether you want a full replacement, and attach photos of the staircase and a close-up of a spindle.

  2. Measure and choose

    A local joiner confirms the spindle size, rail type and rake, and helps you choose profile, timber, metal or glass. You get a fixed written price.

  3. Order materials

    Stock spindles arrive in a few days. Turned copies of period spindles and toughened glass panels take one to three weeks to make.

  4. Remove and fit

    Old spindles are cut out, rails are cleaned and checked, and new spindles are cut to the pitch, spaced correctly and fixed with glue, pins and fillets.

  5. Finish and tidy

    Filler, sanding and finishing are completed if included. The joiner checks the balustrade is rigid, clears up and leaves the stairs ready to use.

Price guide

Spindle replacement prices depend on how many spindles are involved, the material, and whether handrails or newels also need replacing. Stock square spindles are inexpensive, while turned copies, metal and glass cost more. Every job gets a fixed price after photos or a short visit, covering labour and materials.

  • Metal spindle upgrade: £900–£1,800. Wrought iron or steel bars with shoes, fitted to new or existing rails.
  • Oak spindles, full set: £850–£1,700. Solid oak spindles fitted to existing rails, ready for oiling or lacquer.
  • Full re-spindle, straight stair and landing: £550–£1,100. Around 25 to 40 pine or hemlock spindles fitted in a day, finishing extra.

Questions about safety upgrades and gap closing

Can I replace spindles without replacing the handrail?

Yes, as long as the handrail and baserail are sound. Most modern stairs use grooved rails with fillets between spindles, so old spindles can be cut out and new ones fitted to the same rails. If the rail is split, loose or the wrong style for the new spindles, replacing it at the same time is sensible.

Are metal spindles stronger than wooden ones?

Metal spindles are harder to snap than slim timber spindles and do not split, but the overall strength of a balustrade depends more on the handrail, baserail and newel fixings. Metal bars are fixed with shoes that sit in grooved rails. Either material is safe when fitted properly to sound rails.

How much does it cost to replace stair spindles?

Replacing one or two broken spindles typically costs £90 to £180. A full re-spindle of a straight stair and landing in pine or hemlock is usually £550 to £1,100. Oak sets cost £850 to £1,700, metal spindles £900 to £1,800 and glass panels £1,600 to £3,500, depending on the length of balustrade.

Get a free spindle replacement quote

Tell us what you need and we'll come back with a clear price.

Request a quote