Spindle Replacement FAQs
Straight answers to the questions we're asked most.
What is the difference between spindles and balusters?
There is no real difference: spindles and balusters are the same thing, the vertical posts between the handrail and the baserail or stair string. Balustrade is the term for the whole assembly, including spindles, handrail, baserail and newel posts. Banister is often used informally for either the handrail or the whole balustrade.
How much does it cost to replace stair spindles?
Replacing one or two broken spindles typically costs £90 to £180. A full re-spindle of a straight stair and landing in pine or hemlock is usually £550 to £1,100. Oak sets cost £850 to £1,700, metal spindles £900 to £1,800 and glass panels £1,600 to £3,500, depending on the length of balustrade.
What is the maximum gap between stair spindles?
For new or replacement work, the gap between spindles should not allow a 100 mm sphere to pass through, as set out in Approved Document K. In practice joiners space spindles so the gap is 99 mm or less. Many older staircases have wider gaps, which can be fixed by adding spindles.
Can I replace spindles without replacing the handrail?
Yes, as long as the handrail and baserail are sound. Most modern stairs use grooved rails with fillets between spindles, so old spindles can be cut out and new ones fitted to the same rails. If the rail is split, loose or the wrong style for the new spindles, replacing it at the same time is sensible.
How long does it take to replace stair spindles?
A single spindle takes one to two hours. A full re-spindle of a straight stair with a landing usually takes a day, with the stairs usable throughout. Upgrading to glass or replacing handrails and newels as well can take one to two days. Bespoke turned copies need one to three weeks to be made first.
What size are stair spindles?
The most common UK spindle sizes are 32 mm and 41 mm square, with 41 mm used on most traditional stairs and 32 mm on slimmer modern designs. Lengths are typically 900 mm or 1100 mm before cutting. Metal spindles are usually 12 to 16 mm. Measure your existing spindle across the square section to match it.
Can you match old Victorian spindles?
Yes. A wood turner can copy an original Victorian or Edwardian spindle on a copy lathe, matching diameter, beads, tapers and length. You need to provide an original or a large broken piece as a pattern. Copies can be turned in pine, hemlock, mahogany or oak to suit painted or polished stairs.
Do I need permission to replace stair spindles?
In most homes you do not need planning permission or Building Control approval to replace spindles. It is good practice to ensure the new balustrade meets current guidance on gap size and height. If your home is listed, you may need listed building consent before altering the staircase.
Are metal spindles stronger than wooden ones?
Metal spindles are harder to snap than slim timber spindles and do not split, but the overall strength of a balustrade depends more on the handrail, baserail and newel fixings. Metal bars are fixed with shoes that sit in grooved rails. Either material is safe when fitted properly to sound rails.
Can I replace spindles with glass?
Yes. Toughened safety glass panels can replace spindles, held between existing rails with clamps or fitted into slotted handrails and baserails. Glass makes hallways brighter and is easy to clean. Panels are made to measure after the old spindles are removed, so allow one to two weeks lead time.
Why are my stair spindles loose?
Spindles usually come loose because the glue has failed, fillets have dropped out of the grooved rail, or the handrail or newel post is moving. Tightening a single spindle with glue and a pin often works, but if several are loose, check the newel posts first, as fixing them stabilises the whole balustrade.
Should spindles be painted before or after fitting?
Priming before fitting protects the ends and makes final painting easier, but the top coats are best applied after fitting so filler and pin holes can be touched in. Oak spindles can be oiled or lacquered before fitting, then given a final coat once installed to seal any marks.
Get a free spindle replacement quote
Tell us what you need and we'll come back with a clear price.
Request a quote