Guide · Homeowners · 3 min read · Updated 17 November 2026
How Much Does Stair Spindle Replacement Cost in the UK?
Short answer
Replacing one or two broken stair spindles typically costs £90–£180 fitted. A full re-spindle of a straight stair and landing in pine or hemlock runs £550–£1,100, and solid oak spindles £850–£1,700. Metal spindle upgrades cost £900–£1,800, glass panel balustrades £1,600–£3,500, and turned copies of period spindles start from £35 per spindle plus fitting.
Spindle replacement prices at a glance
Spindles, also called balusters, are the vertical bars between the handrail and the baserail or treads. They take knocks from furniture, children and vacuum cleaners, and older ones dry out and split. Replacing one or two is a short job. Replacing every spindle on a flight and landing is usually a full day's work for a joiner, longer for complex stairs or bespoke spindles. These are typical fitted UK prices for 2026; painting, staining or lacquering is often priced separately unless stated.
| Job | Typical price | What it usually includes |
|---|---|---|
| Replace one or two broken spindles | £90–£180 | Stock spindles fitted, primed or stained, including call-out and fixings |
| Full re-spindle, straight stair and landing | £550–£1,100 | Around 25 to 40 pine or hemlock spindles fitted in a day, finishing extra |
| Oak spindles, full set | £850–£1,700 | Solid oak spindles fitted to existing rails, ready for oiling or lacquer |
| Metal spindle upgrade | £900–£1,800 | Wrought iron or steel bars with shoes, on new or existing rails |
| Glass panel balustrade | £1,600–£3,500 | Toughened glass infill panels between rails or in slotted rails |
| Turned period spindle copies | from £35 per spindle | Bespoke turned copies of original profiles, plus fitting |
What affects the price
The number of spindles is the first factor. A straight flight with a short landing might have 25 spindles, while a stair with a long galleried landing can have 50 or more. Each spindle must be cut to the exact rake angle at top and bottom, so time adds up quickly. Material is the second factor: pine and hemlock are the most affordable, oak costs more and is harder to cut and finish, and metal and glass need different fixings and often new rails.
The type of staircase matters too. On a closed-string stair, spindles sit between a baserail and the handrail, held by small infill strips called fillets, which makes replacement fairly straightforward. On a cut-string stair, spindles are fixed into the treads themselves, often in dovetails or holes, which takes more care to remove and refit without damaging the treads.
- Number of spindles on the flight and landing
- Timber, metal or glass, and the quality of the material
- Closed-string or cut-string staircase
- Whether handrails, baserails or newels also need replacing
- Bespoke turnings to match period originals
- Painting, staining or lacquering after fitting
Single spindle repairs
A single broken spindle is the most common call-out. If the profile is a standard stock design, the joiner brings a matching spindle, cuts out the broken one, cleans the slots, cuts the new spindle to the right angle and length, and fixes it with glue and pins or screws, replacing any fillets. The whole job often takes under an hour. If the stair is painted, the new spindle is primed and can be painted to match; if it is stained, the joiner will try to get close, though exact colour matches to aged timber are hard.
If the profile is not a stock design, the options are a turned copy, which costs more and takes longer, or replacing a matching spindle from a less visible position and fitting the new one there.
While on site, a good joiner will also check the neighbouring spindles, the handrail and the newel post. A spindle often breaks because the balustrade is already loose, and re-fixing a wobbly newel at the same visit costs far less than a second call-out.
Full re-spindling
Replacing every spindle is the quickest way to change the look of a hallway. Many people swap dated turned spindles for square stop-chamfered spindles, or switch from painted pine to oak, metal or glass. The joiner removes the old spindles, cleans up the rails and fixes the new ones at regular spacing, making sure the gaps meet current guidance that a 100 mm sphere should not pass through.
If the handrail, baserail or newels are worn, loose or a different style, it often makes sense to replace them at the same time. That adds cost but avoids a mismatched result where new spindles sit between old rails.
Expect the joiner to protect the stairs and hallway with dust sheets, and to take away the old spindles. A full re-spindle creates some sawdust and noise but little mess compared with most building work, and the stairs remain usable throughout the day with care.
Ways to save
Choose a stock spindle in pine or hemlock if you plan to paint, as the paint hides the timber and stock profiles are much cheaper than bespoke turnings. Keep the existing handrail and newels if they are solid and the style suits the new spindles; a fresh coat of paint or a sand and refinish often brings them back. Paint the spindles yourself after fitting. Doing the whole flight at once is usually better value per spindle than several separate small jobs, because the call-out and setting-up time is shared.
What a good quote includes
A clear quote states the number of spindles, the material and profile, whether rails and newels are being replaced, how the spindles will be fixed, who removes the old ones and whether finishing is included. It should also confirm that the new balustrade will keep gaps under 100 mm and the guarding at a safe height. We arrange spindle replacement through vetted local joiners, who measure the stair and confirm the details before giving a fixed price.
Questions people also ask
How long does it take to replace stair spindles?
One or two spindles usually take under an hour. A full re-spindle of a straight stair and landing typically takes a day for a joiner. Stairs with long landings, cut strings, bespoke spindles or new rails can take two days or more, plus time for painting or finishing afterwards.
Can I replace just one stair spindle?
Yes. Single broken spindles are a common repair. If the profile is a stock design, a matching spindle can be cut and fitted quickly. If it is a period or unusual profile, a turned copy can be made, which costs more and takes a little longer.
How many spindles are on a typical staircase?
A straight flight in a typical UK house has roughly 25 to 40 spindles once you include a short landing, usually two per tread on cut-string stairs or set at regular spacing on closed-string stairs. Galleried landings add many more. The joiner counts them during the survey.
Written and checked by the Spindle Replacement team. Read our editorial policy.
More guides
Stair Spindle Gap Regulations UK: The 100 mm Rule Explained
Under Approved Document K, guarding on stairs and landings should not let a 100 mm sphere pass through any opening, so the clear gap between spindles…
How to Replace a Broken Stair Spindle: Step-by-Step Guide
To replace a broken stair spindle, remove the fillets holding it in the handrail and baserail, cut out the old spindle, measure the rake angle, cut…
Oak vs Metal vs Glass Stair Spindles: Which Should You Choose?
Painted pine or hemlock is the cheapest re-spindle at £550–£1,100 for a straight stair and landing. Solid oak spindles cost £850–£1,700, metal…
Matching Victorian and Edwardian Stair Spindles: A Guide
Original Victorian, Edwardian and 1930s spindles rarely match modern stock profiles, so the best route is usually a turned copy made from an…
Get a free spindle replacement quote
Tell us what you need and we'll come back with a clear price.
Request a quote